A Myrtle Beach emergency electrician provides an explanation on the reason behind why circuit breakers are tripping. According to recent reports, one of the most common electricity related dilemmas that many homeowners experience is tripping circuit breakers. When a circuit breaker trips, your home has no electricity. This can last for several minutes to a couple of hours. Also, tripping circuit breakers can happen more than once a day.
When your circuit breaker trips, all you have to do is go to your main electrical panel and reset your electricity. Switch it off and then wait for a couple of minutes before switching it back on again. If this does not resolve the problem or if the tripping repeats several times throughout the day, it is time to call in an emergency electrician.
Why are circuit breakers tripping?
Tripping is actually a good thing to happen. For most homeowners, it is annoying and a disturbance, especially if they are using their desktop computers to finish a report or other important matters. On the other hand, tripping is actually a safety mechanism of circuit breakers.
According to industry experts, circuit breakers trip to cut off the flow of electricity throughout a house, often temporarily, to prevent overheating of your circuit breakers. Modern electrical system have this feature that can detect a sudden change in the electrical circuits throughout the house. When this sudden change is detected, the circuit breaker will trip to prevent the electricity from continuously flowing and overheating your entire electrical system, which can result to more severe and bigger problems, such as an electrical fire.
On the other hand, before doing anything to remediate your tripping circuit breaker, it helps if you know the root cause of the problem. Many electricians believe that a circuit breaker trips primarily as a result of having short circuits, overloaded circuits and when there have been ground fault surges.
- Short circuits – Local electricians Myrtle Beach say that short circuit is what happens when a hot wire comes into contact with a neutral wire. This often occurs in outlets, resulting in a sudden increase in the flow of electricity, creating more heat than the circuit can handle. To prevent further damage and problems, such as an electrical fire, the circuit is shut off by tripping the circuit breaker. You’ll know the tripping circuit breaker is due to short circuits if there is a burnt smell around the breaker and if you notice black or brown discoloration – a sign of being burnt – around the breaker.
A hot wire and neutral wire will cross primarily because there is loose connection or faulty wiring somewhere in the electrical system. Thus, you need to have your electrician check your electrical system to find the loose connection or faulty wiring so as to prevent your circuit breaker from tripping again.
- Overloaded circuits – According to an emergency electrician in Myrtle Beach, circuits have a maximum amount of electricity that it can handle and provide you with. Having this circuit provide you with more electricity by plugging in a large appliance while using other electrical powered tools and gadgets will result to overheating circuits, which can easily catch fire. To prevent overheating circuits, circuit breakers trip. To avoid this, make sure you do not overuse your plugs. Distribute the use of your devices, equipment and gadgets and do not plug them in the same outlet. Also, turn off or unplug those devices that you do not use.
- Ground fault surges – A ground fault surge happens when a hot wire comes into contact with a ground wire or the side of a metal box that is connected to a ground wire. Ground wire is made from bare copper which reacts with a hot wire causing overheating in the circuit similarly with a short circuit.