(843)-353-6345

electricianWhether you go DIY or hire an electrician to do the electrical work for remodeling or new construction, the correct procedure involves having an inspector, who is employed by the local code business offer, conduct two reviews. There are other reasons that require electrical inspections like when you’re interested in buying a house or if you are planning to sell your home.

Two Rounds of Electrical Inspection

The first inspection is what they call the rough in inspection. This occurs if you have installed all of the electrical boxes, conduit, cables, and wires up to the point that you’re ready for the walls to be closed by surfaces. This type of inspection has to be done before the installation of the insulation so that the inspector gets a clear view of all the wire runs that come from the service panel to the fixtures and to the appliances.

The second inspection happens once the house has been completed but you’re still not allowed to start using the space. The inspection is referred to as the final inspection. All of the walls have been closed in, the painting has been completed, the floors are finished, and you are all set for furniture installation. Make sure that all the circuits are fully functional and that all light fixtures have been hung and connected. In case the inspector gives his approval, that means everything has meet the professional standard and it is up to code.

What Inspectors Look For

Proper circuits – the house or home addition has the correct number of circuits to accommodate the electrical demand of the area. This includes making sure that appliances have dedicated circuits, if necessary.

GFCI and AFCI circuit protection GCFI circuit protection has long been required for appliances and outlets that are located outdoors or near sources of water. The electrical inspection will include making sure that GFCI protected outlets have been installed and circuit breakers are installed where they should be. He will also check for AFCI or arc fault circuit interrupters.

Electrical boxes – it’s also part of the electrical inspection to make sure that all electrical boxes are flus in the wall and that they are big enough to house the number of wire conductors, and other devices that they will contain. It must be also be fastened securely.

Box heights – electrical inspectors will also check the height of the switch and outlets and make sure that they are consistent. Outlets must be at least 12 inches above the floors and the switches must also be at least 48 inches above the floor.

Cable and wires – a licensed electrician Myrtle Beach will also check the cables and make sure that they are clamped in the boxes.

Cable anchoring – electrical inspectors will also inspect for correct cable anchoring. The cables must be attached to the wall studs in order to secure them.

Wire Labeling – even though this is not required by building codes, some homeowners and residential electricians add labels to the wires in the electrical boxes to show the circuit number as well as the circuit’s amperage.

Call MB Electrician Pros if you need help with anything that’s related to your electrical system.

MB Electrician Pros
Myrtle Beach, SC 29577
843-353-6345
electriciansmyrtlebeach.com

Share and Enjoy !

0Shares
0 0

Slider by webdesign